System-Failure - HP 6125G Command Reference Manual

undo sysname
View
System view
Default level
2: System level
Parameters
sysname: Name of the device, which is a string of 1 to 30 characters.
Description
Use sysname to set the device name.
Use undo sysname to restore the default.
The default device name is HP.
A device name identifies a device in a network and works as the user view prompt at the CLI. For
example, if the device name is Sysname, the user view prompt is <Sysname>.
Examples
# Set the name of the device to S2000.
<Sysname> system-view
[Sysname] sysname S2000
[S2000]

system-failure

Syntax
system-failure { maintain | reboot }
undo system-failure
View
System view
Default level
3: Manage level
Parameters
maintain: Specifies that when the system detects any software abnormality, it maintains the current
situation, and does not take any measure to recover itself.
reboot: Specifies that when the system detects any software abnormality, it recovers itself through
automatic reboot.
Description
Use system-failure to configure the exception handling method for the master switch in the IRF fabric.
By default, the master switch in the IRF fabric adopt the reboot method to handle exceptions.
The exception handling method is effective to only the failed member switch, and does not influence the
operations of other IRF member switches.
162