Clock Summer-Time Repeating - HP 6125G Command Reference Manual

Parameters
zone-name: Specifies a daylight saving time by its zone name, a case-sensitive string of 1 to 32
characters.
start-time: Start time, in the hh:mm:ss format. Zeros can be omitted, unless you specify 00:00:00.
start-date: Start date, in the MM/DD/YYYY or YYYY/MM/DD format.
end-time: End time, in the hh:mm:ss format. Zeros can be omitted, unless you specify 00:00:00.
end-date: End date, in the MM/DD/YYYY or YYYY/MM/DD format.
add-time: Time added to the standard time of the device, in the hh:mm:ss format. Zeros can be omitted,
unless you specify 00:00:00.
Description
Use clock summer-time one-off to adopt daylight saving time from the start-time of the start-date to the
end-time of the end-date. Daylight saving time adds the add-time to the standard time of the device.
Use undo clock summer-time to cancel the configuration of the daylight saving time.
By default, daylight saving time is disabled and the UTC time zone applies.
The interval between start-time start-date and end-time end-date must be longer than one day and shorter
than one year. If the current system time is in the specified daylight saving days, the add-time value
automatically adds to the system time.
To verify the setting, use the display clock command.
The timestamps in system messages are adjusted in reference to the time zone and daylight saving
schedule.
Related commands: clock datetime, clock summer-time repeating, clock timezone, and display clock.
Examples
# Set the system time ahead one hour for the period between 06:00:00 on 08/01/201 1 and 06:00:00
on 09/01/201 1.
<Sysname> system-view
[Sysname] clock summer-time abc1 one-off 6 08/01/2011 6 09/01/2011 1

clock summer-time repeating

Syntax
clock summer-time zone-name repeating start-time start-date end-time end-date add-time
undo clock summer-time
View
System view
Default level
3: Manage level
Parameters
zone-name: Name of the daylight saving time, which is a string of 1 to 32 characters.
start-time: Start time, in the hh:mm:ss format. Zeros can be omitted, unless you specify 00:00:00.
start-date: Start date, which can be set in the following ways:
129