Tftp Client Dscp - HP 6125G Command Reference Manual

6125 blade switch series fundamentals command reference
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

vpn-instance vpn-instance-name: Specifies the MPLS L3VPN where the TFTP server belongs. The
vpn-instance-name argument is a case-sensitive string of 1 to 31 characters.
source: Configures parameters for source address binding.
interface interface-type interface-number: Specifies the source interface by its type and number. The
primary IP address configured on the source interface is the source IP address of the packets sent by
TFTP. If no primary IP address is configured on the source interface, the transmission fails.
ip source-ip-address: Specifies the source IP address for the current TFTP client to transmit packets.
This source address must be an IP address that has been configured on the device.
Description
Use tftp to download a file from or upload a local file to a TFTP server in an IPv4 network.
Examples
# To upgrade the device, download the newest.bin file from the TFTP root directory of the TFTP server at
192.168.1.26 and save it to both the Flash root directory of the master and the Flash root directory of the
subordinate device with the member ID 2.
<Sysname> tftp 192.168.1.26 get newest.bin startup.bin
.
File will be transferred in binary mode
Downloading file from remote TFTP server, please wait..................
TFTP:
2737556 bytes received in 13 second(s)
File downloaded successfully.
// Download the file from the TFTP server to the root directory on the Flash of the master.
<Sysname> tftp 192.168.1.26 get newest.bin slot2#flash:/startup.bin
File will be transferred in binary mode
Downloading file from remote TFTP server, please wait...|
TFTP:
2737556 bytes received in 14 second(s)
File downloaded successfully.
// Download the file from the TFTP server to the root directory on the Flash of the subordinate device.

tftp client dscp

Syntax
tftp client dscp dscp-value
undo tftp client dscp
View
System view
Default level
2: System level
Parameters
dscp-value: Specifies a DSCP value in the range of 0 to 63.
Description
Use tftp client dscp to set the DSCP value for IPv4 to use for outgoing TFTP packets on a TFTP client.
82

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125g/xg

Table of Contents