Display Schedule Reboot; Display System-Failure - HP 6125G Command Reference Manual

Field
Executed time

display schedule reboot

Syntax
display schedule reboot [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
3: Manage level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display schedule reboot to display the reboot schedule.
Related commands: schedule reboot at and schedule reboot delay.
Examples
# Display the reboot schedule.
<Sysname> display schedule reboot
System will reboot at 16:00:00 03/10/2010 (in 2 hours and 5 minutes).
The output shows that the system will reboot at 16:00:00 on March 10, 2010 (in two hours and five
minutes).

display system-failure

Syntax
display system-failure [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
3: Manage level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
Description
Execution time of the command and the difference between
the current system time and scheduled time
145