Speed (User Interface View) - HP 6125G Command Reference Manual

shell
undo shell
View
VTY user interface view
Default level
3: Manage level
Parameters
None
Description
Use shell to enable terminal services on the current user interface.
Use undo shell to disable terminal services on the current user interface.
You cannot disable the terminal services on the user interface through which you are logged in.
By default, terminal services are enabled on all user interfaces.
Examples
# Disable terminal services on VTYs 0 through 7, which means you cannot log in to the device through
VTYs 0 through 7.
<Sysname> system-view
[Sysname] user-interface vty 0 7
[Sysname-ui-vty0-7] undo shell
% Disable ui-vty0-7 , are you sure? [Y/N]:y
[Sysname-ui-vty0-7]
The following message appears when a terminal tries to Telnet to the device:
The connection was closed by the remote host!

speed (user interface view)

Syntax
speed speed-value
undo speed
View
AUX user interface view
Default level
2: System level
Parameters
speed-value: Transmission rate in bps. The transmission rates available with asynchronous serial
interfaces include: 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400
bps, 57600 bps, and 1 15200 bps. The transmission rate varies with devices and configuration
environment.
Description
Use speed to set the transmission rate on the user interface.
42