Display Users - HP 6125G Command Reference Manual

Field
Type
Tx/Rx
Privi
Auth
Int
A
L
N
P
# Display summary about all user interfaces.
<Sysname> display user-interface summary
User interface type : [AUX]
User interface type : [VTY]
2 character mode users.
10 UI never used.
2 total UI in use
Table 4 Command output
Field
User interface type
0:X
character mode users.
UI never used.
total UI in use

display users

Syntax
display users [ all ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Description
Type and relative number of the user interface.
Transmission/Receive rate of the user interface.
Indicates the command level of a user under that user interface.
Authentication mode for the users, A, P, L, or N.
The physical port that corresponds to the user interface. For AUX and VTY user interfaces,
a hyphen (-) is displayed.
AAA authentication.
Local authentication. This mode is not supported on the device.
No authentication.
Password authentication.
0:XXXX
12:UXUX XXXX
(X)
(U)
(X)
(U)
Description
Type of user interface, AUX, VTY.
0 represents the absolute number of the user interface. X means this
user interface is not used; U means this user interface is in use.
Number of users, or, the total number of character U.
Number of user interfaces not used, or, the total number of
character X.
Total number of user interfaces in use.
23