Super Password - HP 6125G Command Reference Manual

View
System view
Default level
2: System level
Parameters
local: Uses the local password set with the super password command for user privilege level switching
authentication. If no password is set with the command, the system allows a console port user to switch
the privilege level without authentication, but denies the switching requests of VTY users.
scheme: Uses AAA for user privilege level switching authentication. For more information about AAA,
see Security Configuration Guide.
local scheme: Uses the local password, if configured, for user privilege level switching authentication. If
the password is not configured, the system allows a console port user to switch the privilege level but uses
AAA to authenticate VTY users.
scheme local: Uses AAA for user privilege level switching authentication. If the AAA configuration is
incomplete or invalid or the server does not respond, the system uses the local password for the
authentication.
Description
Use super authentication-mode to set the authentication mode for user privilege level switching.
Use undo super authentication-mode to restore the default.
By default, the authentication mode for the user privilege level switching is local.
Related commands: super password.
Examples
# Set the authentication mode for the user privilege level switching to local.
<Sysname> system-view
[Sysname] super authentication-mode local
# Set the authentication mode for the user privilege level switching to scheme local.
<Sysname> system-view
[Sysname] super authentication-mode scheme local

super password

Syntax
super password [ level user-level ] { cipher | simple } password
undo super password [ level user-level ]
View
System view
Default level
2: System level
Parameters
level user-level: User privilege level, which ranges from 1 to 3 and defaults to 3.
10