Slave Auto-Update Config - HP 6125G Command Reference Manual

The current configuration is saved to the active main board successfully.
Slot 2:
The current configuration file is saved successfully.
Configuration is saved to device successfully.
<Sysname> display startup
MainBoard:
Current startup saved-configuration file: NULL
Next main startup saved-configuration file: flash:/startup.cfg
Next backup startup saved-configuration file: NULL
Slot 2:
Current startup saved-configuration file: NULL
Next main startup saved-configuration file: flash:/startup.cfg
Next backup startup saved-configuration file: NULL
The output shows that the main next-startup configuration file has changed from aa.cfg to startup.cfg on
each member device.
# Save the running configuration to the configuration file test.cfg on IRF member 2.
• Approach 1:
<Sysname> save test.cfg slot 2
The current configuration will be saved to slot2#flash:/test.cfg. Continue? [Y/N]:y
Now saving current configuration to the device.
Saving configuration slot2#flash:/test.cfg. Please wait...
.........
Configuration is saved to slot2#flash successfully.
Approach 2:
•
<Sysname> save slot2#flash:/test.cfg
# Save the running configuration to the main next-startup configuration file, without any confirmation
required.
<Sysname> save force
Validating file. Please wait.................
The current configuration is saved to the active main board successfully.
Slot 2:
The current configuration file is saved successfully.
Configuration is saved to device successfully.

slave auto-update config

Syntax
slave auto-update config
undo slave auto-update config
View
System view
Default level
2: System level
118