Vertical Size Adjustment - Barco BarcoVision R9000740701 Owner's Manual

Vertical Size Adjustment

Push the control disk up or
down to highlight V SIZE on
the Geometry menu and then
press ENTER .
Adjust the vertical size by push-
ing the control disk up or down
until the exact image height is
obtained.
8-22
RANDOM ACCESS ADJUSTMENT MODE
Image too
tall
Image too
short
G E O M E T R Y
R A S T E R S H I F T
LE FT - R I G H T (E - W )
TO P - B O TT O M ( N - S )
V LI N E A R I T Y
B L A N K I N G
Selec t w ith
t h en < E N TE R >
< E X I T> t o ret urn
ENTER will select vertical size adjustment
EXIT returns to random access adjustment
mode menu,.
ADJUST returns to operational mode
Note :
- If the internal # pattern was selected, this
pattern remains on the screen.
- If the genlocked pattern was selected, the
external source will be displayed.
A bar scale and a number indicator give a
visual indication of the vertical size adjust-
ment.
Hint : In order to avoid loss of resolution in the
projected image and to ensure maximum CRT
longevity, do not use an excessively small
vertical size setting.
EXIT will return to Geometry.
R5975238 BARCOVISION 701 MULTIMEDIA 070497
H P H A S E
H S I Z E
V S I Z E
or
V S IZ E
7 0