Connecting A Rcvds 05 Switcher To The Projector; Connecting A Vs05 Switcher To The Projector; Connecting An Ir Remote Receiver To The Projector; Peripheral Equipment - Barco BarcoVision R9000740701 Owner's Manual

PERIPHERAL EQUIPMENT

Connecting a RCVDS 05 switcher to the projector.

- Up to 10 inputs (20 inputs when video and S-video) with the RCVDS 05 switcher and
up to 90 inputs when 10 RCVDS switchers are linked via the expansion modules.
- Serial communication with the projector.
- Remote control buttons on the RCVDS to control the projector (source selection and
analog settings)
- The selected source number will be displayed on a 2 digit display and the selected
input modules will be indicated with a LED on the rear.
For more information about the use of the RCVDS 05, consult the Owner's Manual,
order number: R5975765.

Connecting a VS05 switcher to the projector.

The VS05 can switch up to 5 Composite Video sources, 3 S-Video Sources and 1 RGB
analog or component Video source to the projector. In addition, the audio signal proper
to the source, can be switched to an audio amplifier.
Order number : R9827890.
For more information about the use of the VS05, consult the Owner's Manual, order
number: R5975245.

Connecting an IR Remote Receiver to the projector

This infra-red receiver unit makes it possible to control the projector from another room.
There is a communication line cable between the IR receiver and the projector or the
RCVDS. The infrared control information from the Remote Control Unit is sent to the
IR Remote Receiver. The IR Remote Receiver 800 displays the selected source on
a 7-segment display.
Order number : R9827515.
4-12
CONNECTIONS
R5975238 BARCOVISION 701 MULTIMEDIA 280497