Table of Contents
Advertisement
BARCO_logo
The BARCO logo can be added to the
image, in overlay or in background,
on any place on the screen.
To add the BARCO logo or to change
a setting in the BARCO logo menu,
highlight 'BARCO logo' by pushing
the control disk up or down and press
ENTER to select.
WARNING : Continuous use of the
BARCO logo damages the RED
CRT.
The BARCO logo menu will be dis-
played on the screen. Within this
menu, four toggle settings are avail-
able.
Mode [ON/OFF] :
ON : BARCO logo will be displayed
on the screen.
To position the logo on the screen,
push the control disk up, down, to
the left or to the right until the
desired position is reached.
OFF : No BARCO logo displayed
on the screen.
Size [SMALL/LARGE] :
SMALL : Small BARCO logo will be
displayed if mode is on.
LARGE : Large (double size)
BARCO logo will be displayed if
mode is on.
Background [ON/OFF] :
ON : BARCO logo will be displayed
on a black background.
BARCO
OFF : BARCO logo will be dis-
played without any background.
BARCO
9-10
SERVICE MODE
PROJECTOR SET-UP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE : operating
BARCO LOGO
Select with
then <ENTER>
<EXIT> to return.
ENTER displays the BARCO logo menu.
EXIT returns to the Service menu
BARCO LOGO
MODE :
SIZE : SMALL
BACKGROUND : ON
ORBITTING : ON
You can move the logo
on the screen, using
the arrow keys.
WARNING : continuous
use of the BARCO logo
damages the RED CRT !
Select with
<ENTER> to toggle
<EXIT> to return.
Orbiting [ON/OFF] :
ON : on the BARCO logo will orbit
around it axis.
OFF : no orbit of the BARCO logo
R5975228 BARCOVISION 701 MULTIMEDIA 070597
or
ON
or
Advertisement
Table of Contents
