SERVICE MODE
I2C Diagnostics
Highlights 'I2C Diagnostics' by
pushing the control disk up or
down and press ENTER.
The I2C diagnostics menu gives
an overview of the I2C failures
inside the projector.
To scroll through the failure list, push
the control disk up or down.
The I2C address, IC number and
module name will be given in I2C
diagnostic menu.
When no errors are detected, the
following message will appear on the
screen :
"No errors on i2c-bus detected".
R5975228 BARCOVISION 701 MULTIMEDIA 070597
SERVICE MODE
PROJECTOR SET-UP
MEMORY MANAGEMENT
COMMON SETTINGS
I2C DIAGNOSTICS
Select with
or
then <ENTER>
<EXIT> to return.
I2C DIAGNOSTICS
Failures :
addr
IC number
mod.name
48H
IC200
DECODER
Scroll with
or
then <ENTER>
<EXIT> to return.
9-21