Crt Run In Cycle; Projector Warm Up - Barco BarcoVision R9000740701 Owner's Manual

SERVICE MODE

CRT run in cycle

The CRT run in cycle option can only be activated when memory blocks on an internal
# pattern are available. When one or more such blocks are available, a flashing white
image (5sec on, 5 sec off) is generated and that for 5 min on the first internal block.
In the next 5 min, a second internal block will be used to generate the flashing white
image. The image will also be shifted in a vertical way to prevent a CRT burn in. To
quit the CRT run in cycle option, press EXIT.
Highlight 'CRT run in cycle' with
the control disk and press EN-
TER to start.
If a memory block adjusted on an
internal # pattern is available, the
CRT run in cycle will start when
pressing ENTER. If no such a block
is available, the projector cannot
run the CRT run in option and leaves
the adjustment mode.
If you still want to run CRT run in
cycle, create first a memory block
on an internal # pattern and restart
the CRT run in option.
R5975228 BARCOVISION 701 MULTIMEDIA 070597
COMMON SETTINGS
G2 ADJUSTMENT
CRT RUN IN CYCLE

PROJECTOR WARM UP

Select with
then <ENTER>
<EXIT> to return.
ENTER selects the CRT run in cycle option.
EXIT returns to the Path Selection main
menu.
CR T RU N IN C YC LE
A flashi ng white pattern
wi ll be generat ed unti l
< EX IT> is press ed.
The proj ec tor only uses
memory bloc k s adj us ted
on an i nternal # patt ern;
if no such bl ock is
av ail abl e, the proj ect or
c an't run t he proc edure
and l eav es t he adjus tment
m od e .
< EN TER > t o c ont i nue
< EX IT> to c ancel
ENTER starts the 'CRT run in' when an
internal generated # pattern is available.
EXIT returns to the Path Selection main
menu.
or
9-19