Horizontal Size Adjustment - Barco BarcoVision R9000740701 Owner's Manual

Horizontal Size Adjustment

Push the control disk up or
down to highlight H SIZE on
the Geometry menu and then
press ENTER .
Adjust the horizontal size by
pushing the control stick to the
right or to the left until the exact
image width is obtained.
Note :
- if the internal # pattern was
selected, this pattern re-
mains on the screen.
- if the genlocked pattern was
H size too
large
H size too
small
8-20
RANDOM ACCESS ADJUSTMENT MODE
Ideal image size
G E O M E T R Y
H P H A S E
R A S T E R S H I F T
LE FT - R I G H T (E - W )
TO P - B O TT O M ( N - S )
H S I Z E
V LI N E A R I T Y
V S I Z E
B L A N K I N G
Selec t w ith
t h en < E N TE R >
< E X I T> t o ret urn
ENTER will select horizontal size adjust-
ment
EXIT returns to random access adjustment
mode menu.
ADJUST returns to operational mode
selected, the external source will be
displayed.
A bar scale and a number indicator give
a visual indication of the horizontal size
adjustment.
Hint : In order to avoid loss of resolution
in the projected image and to ensure
maximum CRT longevity, do not use an
excessively small horizontal size set-
ting.
EXIT will return to Geometry
R5975238 BARCOVISION 701 MULTIMEDIA 070497
or
H SIZ E
7 0