Table of Contents
Advertisement
Note : all projectors leave the factory after a burn-in period of approximately 100
hours.
Change password
This item is password protected.
Highlight 'Change Password' with the
control disk and press ENTER.
The current password is displayed.
The new password must consist of 4
digits between 0 and 9. Push the
control disk to the left or to the right to
select the digits to be changed. Use
the numeric keys to enter the new
digits.
Press ENTER to save the new pass-
word. Before saving the new pass-
word, a confirmation screen will be
displayed.
Press EXIT to return to the Projector
Set-up menu without saving the new
password.
9-6
SERVICE MODE
PROJECTOR SET-UP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE : operating
BARCO LOGO
Select with
then <ENTER>
<EXIT> to return.
ENTER will display the selected item.
EXIT will return to the Path Selection
main menu.
ADJUST will return to the Operational
mode.
P A S S W O R D
Ente r new passwo rd :
1 9 9 2
Use
and
to select,
a nd re p ro g ra m
wit h nu meri c ke ys.
<E NTER> t o con fi rm
<E XIT> to retu rn
ENTER displays the Confirmation menu.
EXIT returns to the Service mode with-
out saving the new password.
R5975228 BARCOVISION 701 MULTIMEDIA 070597
or
Advertisement
Table of Contents
