Projector Set Up; Identification - Barco BarcoVision R9000740701 Owner's Manual

Projector Set-up
Highlight 'Projector Set-Up' by push-
ing the control disk up or down and
press ENTER to display the projector
set-up menu.
Within the projector set-up menu, the
following items can be consultated or
set to the desired setting :

- Identification

- Total run time
- Change password
- Change language
- Change projector address
- Change baudrate
- Power up mode
- BARCO logo
Identification
Highlight 'Identification' with the con-
trol disk and press ENTER.
9-4
SERVICE MODE
PROJECTOR SET-UP
MEMORY MANAGEMENT
COMMON SETTINGS
I2C DIAGNOSTICS
Select with
then <ENTER>
<EXIT> to return.
PROJECTOR SET-UP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE : operating
BARCO LOGO
Select with
then <ENTER>
<EXIT> to return.
PROJECTOR SET-UP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE : operating
BARCO LOGO
Select with
then <ENTER>
<EXIT> to return.
ENTER will start the selected item.
EXIT returns to the Service mode menu.
R5975228 BARCOVISION 701 MULTIMEDIA 070597
SERVICE MODE
or
or
or