RANDOM ACCESS ADJUSTMENT MODE
Selecting Setup Pattern
If an external source is con-
nected to the projector, the
path selection menu will be
displayed. Push the control
disk up or down to highlight
the desired setup pattern and
then press ENTER.
Genlocked pattern : internally
generated cross hatch pattern,
locked on the external source.
Internal # pattern : internally
generated cross hatch pattern
and locked on internal gener-
ated sync signals. (No exter-
nal source necessary)
If no external source is con-
nected to the projector, the in-
ternal cross hatch pattern menu
will be displayed.
The menus in this manual are
created for an external source,
connected to one of the inputs,
and the 'Genlocked pattern' is
selected.
R5975238 BARCOVISION 701 MULTIMEDIA 070497
C h o o s e
a s et up pat t ern
f ro m bel ow :
S E L E C T E D S O U R C E
G E N L O C K E D P A T T E R N
I N T E R N A L # P A TT E R N
Selec t w ith
t h en < E N TE R >
< E X I T> t o ret urn
ENTER continues to Random Access Ad-
justment Mode or Internal # Pattern Selec-
tion
EXIT returns to Path Selection
ADJUST returns to operational mode
s o u r c e 1
or
8-5