Vertical test mode
Highlight 'V TEST MODE' and
press ENTER.
The test image is enabled to adjust
the start (stop) position and the
area width.
When switching the V test mode to
On, the H test mode will switch to
OFF.
The test image is projected on the
normal image. The start (stop)
position is determined by the blank-
ing controls. The blanking adjust-
ment is also the image border for
the begin (end) position of the soft
edge area. Adjust the blanking for
a normal video image.
C-8
APPENDIX C : SOFT EDGE MATCHING
ENTER toggles between V test mode OFF
and ON.
EXIT returns to the Random Access Ad-
justment Mode main menu.
ADJUST returns to the Operational mode.
Bot t om bl ank i ng
R as t e r
R5975238 BARCOVISION 701 MULTIMEDIA 070497
S O F T E D G E
C O R R E C T I O N
S T A R T
T O P
S T A R T L E FT R I G H T S TO P
B O T T O M
S T O P
H T E S T M O D E - O FF
V T E S T M O D E - O FF
Select with
or
t h e n <E N TE R >
<E XI T> t o re tu rn
To p B l a nk i ng
Top( w i dt h)
Bot t om( w i dt h)
I m a g e
Vis ible lines
6 39 j
4 1 6