Table of Contents
Advertisement
* All the safety and operating instructions should be read before using this unit.
* The safety and operating instructions manual should be retained for future reference.
* All warnings on the equipment and in the documentation manuals should be adhered
to.
* All instructions for operating and use of this equipment must be followed precisely.
On safety
1. This product should be operated from an AC power source
Operating AC power voltage of the projector:
BARCOVISION 701 MULTIMEDIA
Art.No. R9000740 (230V AC)
The projector leaves the factory for 230 Vac. Consult your dealer to switch over to
120 Vac.
If you are not sure of the type of AC power available, consult your dealer or local
power company.
2. This product is equipped with a 3-wire grounding plug, a plug having a third
(grounding) pin. This plug will only fit into a grounding-type power outlet. This is a
safety feature. If you are unable to insert the plug into the outlet, contact your electrician
to replace your obsolete outlet. Do not defeat the purpose of the grounding-type plug.
WARNING FOR THE CUSTOMERS: THIS APPARATUS MUST BE GROUNDED
(EARTHED) via the supplied 3 conductor AC power cable.
(If the supplied power cable is not the correct one, consult your dealer.)
A. Mains lead (Power cord) with CEE 7 plug:
The wires of the mains lead are colored in accordance with the following code.
1-4
SAFETY INSTRUCTIONS
Green and yellow:
Blue:
Brown:
R5975238 BARCOVISION 701 MULTIMEDIA 070497
earth (safety earth)
neutral
line (live)
Advertisement
Table of Contents
