Barco BarcoVision R9000740701 Owner's Manual page 50

R9000740 vision m 701 multimedia
Table of Contents

Advertisement

Note : to adjust the Analog picture control while in the 'Adjustment mode', press
the ADJUST key. The next General Access menu will be displayed.
Push the control disk up or
down to select the analog con-
trol to be adjusted and press
the ENTER key to confirm.
When the analog control is
adjusted the projector returns
automatically to the General
access menu. When you want
to return to the Adjustment
mode, press EXIT, otherwise
select quit ADJUST and press
ENTER to return to operational
mode.
You are now in the 'Adjustment mode'. The control disk is used to make menu
selections and also vertical and horizontal adjustments. The ENTER and EXIT
keys are used to move forward and backward through the menu structure. The
ADJUST key can be used to terminate the adjustment mode while a path
selection menu (head menu) is displayed.
There are 5 possible paths to follow once in the Adjustment mode. They are :
INSTALLATION - Installation
should be selected if the pro-
jector has been relocated and/
or a different screen size is
desired.
When selecting 'Installation',
the user or operator will be
warned to call a qualified tech-
nician to perform the installa-
tion procedure (see example
of projected warning on next
page).
GUIDED - Guided should be selected if the user intends to perform a complete
alignment of the projected image. All of the necessary geometry and conver-
gence adjustments are made in a predetermined sequence.
RANDOM ACCESS - Random Access should be selected if the user intends to
make only a few adjustments.
SERVICE - Service should be selected if the user intends to delete blocks, change
password or apply information.
IRIS - This selection will only be available when the autoconvergence unit IRIS
is connected to the projector.
6-4
START UP OF THE ADJUSTMENT MODE
R5975238 BARCOVISION 701 MULTIMEDIA 070497
G E N E R A L A C C E S S
S H A R P N E S S
T I N T
C O L O R
B R I G H TN E S S
C O N T R A S T
qui t A D J U S T
Select w it h
,
or
t he n < E N T E R > .
< E X I T> t o re t urn
A DJ U S TM E NT M OD E
S el ect a pat h f rom
be l o w :
G U I D E D
R A N D O M A C C E S S
I N S T A LL A T I O N
S E R V I C E
I R I S
s o ur c e 1
Selec t w ith
or
t h en < E N TE R >
< E X I T> t o ret urn
6 4 3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Barcovision r9000740

Table of Contents