Table of Contents
Advertisement
MESSAGES, WARNINGS AND FAILURES
WARNING :
source not
available
WARNING :
invalid
key entry
WARNING :
invalid
code entry
WARNING :
end of ad-
just range
WARNING :
input no
longer
available
check in-
put signal
or select
new source
WARNING :
input se-
lector not
available
R5975228 BARCOVISION 701 MULTIMEDIA 070497
The input is a valid input but the source is not connected
to the input terminals or the input source is switched off.
When a wrong key is pressed on the RCU.
Message when the entered password is wrong.
End of adjustment range.
Message will be displayed when the input source is no
longer available. The following message then appears:
'check input signal or select new source'.
Message will be displayed after the message 'input no
longer available'. It asks to check the connections
between the source and the projector or to check if the
source is switched on.
It warns you to check the power connection or the power
status of the RCVDS.
Next message will appear immediatly on the screen : 'go
to stand-by'.
10-3
Advertisement
Table of Contents
