9
Operator Interface
9.1
Front Panel Display Layout
The 4200FA UPS front panel is equipped with a Touchscreen display, three status LEDs, and three
manual switches.
Touch Screen
Display
Indicators
On-Line /Fault
Warning
ACInput
9.2
Display LEDs
Table 9.1 describes the front panel LED behaviors and the associated meaning.
LED
Behavior
On-Line/
Green - ON
Fault
Green - OFF
Red - ON
Red - OFF
Warning
Amber - ON
Amber - Flashing
Amber - OFF
A/C Input Green - ON
Green - Flashing
Green - OFF
4200FA Installation and Operation Manual
Display
EPO (Emergency
Reset
Power Off Switch)
Button
Figure 9-1 Panel Layout for Touchscreen Display
Table 9.1 LED Behavior Key
Significance/Meaning
UPS is in On-Line, Backup, or Battery Test mode.
UPS in Bypass of Shutdown mode.
One or more faults occurred. See Records: Faults for details.
No fault occurred.
Service Call needed.
One or more Warnings occurred.
No Warning occurred.
Input or Bypass voltage is within specified range.
Input or Bypass voltage is over specified range.
Input or Bypass voltage is under specified range.
Bypass/On-Line
Switch
63