Equipment Warning Labels - Toshiba 4200FA Installation And Operation Manual

Electrical warning ─ The electrical warning symbol is a lighting bolt enclosed in a triangle.
1)
The Electrical warning symbol is used to indicate high voltage locations and conditions that
may cause serious injury or death if the proper precautions are not observed.
Explosion warning ─ The explosion warning symbol is an explosion image enclosed in a
2)
triangle. The Explosion warning symbol is used to indicate locations and conditions where
molten exploding parts that may cause serious injury or death if the proper precautions are
not observed.
1.1

EQUIPMENT WARNING LABELS

DO NOT attempt to install, operate, maintain or dispose of this equipment until you have read and
understood all of the product warnings and user directions that are contained in this instruction manual.
Shown below are examples of warning labels that may be found attached to the equipment. DO NOT
remove or cover any of the labels. If the labels are damaged or if additional labels are required, contact
your TOSHIBA representative for additional labels.
The following are examples of the warning labels that may be found on the equipment. The labels are
there to provide useful information or to indicate an imminently hazardous situation that may result in
serious injury, severe property and equipment damage, or death if the instructions are not followed.
2 4200FA Installation and Operation Manual