Placing Calls; Placing Emergency Calls; Placing Emergency Calls Using The Lim Line - Mitel 5320 User Manual

Placing Calls

The following instructions describe how to place calls and related features.

Placing Emergency Calls

Contact your system administrator and your local Mitel provider for important information about
dialing emergency services before using your IP phone.
When dialing an emergency number (911 U.S. or 999/112 Europe), you do not have to press
the Outgoing button or enter the Outgoing Call access code (8 is the default code). The system
automatically places emergency calls immediately after you dial the number, even if you do not
select an outside line.

Placing Emergency Calls using the LIM Line

Emergency Number dialing should only be performed by picking up the handset and selecting
the Analog Line key you have programmed. If Privacy Mode is enabled and the Analog Line key
local line is busy, dialing will not occur on the LIM line. Emergency dialing using an IP
connection may not be supported due to system configuration and country location. For more
information, contact your System Administrator. For details about LIM, see "Using the Line
Interface Module (LIM)" on
To make an Emergency Call using the Line Interface Module line:
1. Lift the handset.
2. Press the Analog Line key that you have programmed. ANALOG CALL appears.
3. Dial your local emergency number.
To make an Emergency Call using the Line Interface Module line, when the IP connection
has failed:
1. Lift the handset.
2. Press the Analog Line key that you have programmed. IP FAIL: ANALOG CALL
3. Dial your local emergency number.
Mitel ® 5320/5330/5340 IP Phone User Guide – Release 5.0, April 2013
WARNING
page 14.
appears.
Answering and Placing Calls
Page 35