Troubleshooting Tips - Mitel 5320 User Manual

Troubleshooting

Troubleshooting Tips

The following table includes troubleshooting tips for phone and system features.
NOTE
The IP phone is not working properly. Contact your system administrator.
I cannot use one or more of the
features described in this guide.
I cannot program System Speed-Dial
numbers.
I cannot change the time and date on
the phone display.
I am experiencing audio problems on
my phone such as echo, distorted
sound, or choppiness.
The name on the display is incorrect. Your system administrator assigns display names.
I cannot use the local telephone
company star codes (for example,
*82, *69) when I press the Outgoing
button or use the Outgoing Call
access code (8 is the default code)
when calling an external number.
I cannot use the Agent Help, Record-
a-Call, or Station Monitor feature.
I cannot program a Station Speed
Dial number to the button I want.
Page 88
You can often correct problems that you may be experiencing by resetting the IP
phone to the default settings. See "Resetting the IP Phone to the Default Settings"
on page 37.
Problem
Mitel ® 5320/5330/5340 IP Phone User Guide – Release 5.0, April 2013
Possible Solution
The feature may not be enabled. Contact your system
administrator for more information.
Your system administrator programs System Speed
Dial numbers.
Your system administrator programs the time and date.
Contact your system administrator if you notice that the
date and time are incorrect.
Contact your system administrator if you are having
audio problems.
Rather than pressing the Outgoing button or 8 to
access an outside line, you must dial a Select Line
Group number before you can use the star codes. For
example, if your system is using the default Select Line
Group numbers, dial 92001 to access that line. After
you have dial tone, you can dial the star code and the
number.
If your system uses Peer-to-Peer (P2P) audio, you
cannot use these features when you are on a P2P call.
Contact your system administrator for more
information.
Before assigning the speed-dial number to a
programmable button, you must store the number with
either a Station Speed-Dial bin.