Viewing The Phone Information; Using A Headset - Mitel 5320 User Manual

Getting Started

Viewing the Phone Information

You can use the phone to view system or phone information.
To view system information:
1.
2.
3.

Using a Headset

When using a headset, press
Headset icon
speakerphone when the IP phone is in Headset Mode. Disconnecting the headset automatically
enables the handset.
NOTES
To connect and activate the headset:
1.
2.
To turn off Headset Mode and activate the handset and speakerphone:
Dial 317 (Headset on/off). HEADSET MODE OFF appears.
Page 8
Press (Applications).
Press Settings, and then press About 5320/5330/5340 IP Phone. A screen similar to
the following appears.
Press Close to exit the Applications menu.
appears when the headset is in use. You cannot use the handset or
The headset must be hearing aid compatible (HAC).
If your headset has a power-saver mode, make sure the system administrator has
enabled the "Headset Connect Tone" feature. If this is not enabled, you may miss
the first few seconds of an incoming call.
Insert the headset jack into the Headset port
Dial 317 (Headset on/off). HEADSET MODE ON appears.
Because Headset Mode disables the handset and speakerphone, you
NOTE must turn off Headset Mode before you can use the handset or
speakerphone.
Mitel
(Speaker) to connect to or disconnect from calls. The
located on the back of the IP phone.
® 5320/5330/5340 IP Phone User Guide – Release 5.0, April 2013