Answering Calls
The following instructions describe how to answer a call.
To answer a call:
Hanging Up
If you are out of range for more than 10 seconds, any call that is in progress is dropped and not
recovered.
To hang up:
Cordless Handset Alerting Tones and LEDs
The handset provides the following alerting tones:
Mute key on cordless device ON/
OFF
Mute key on Phone ON/OFF
Low battery (within 10 minutes left
for DECT and within 20 minutes left
for Bluetooth)
Low battery (within 2 minutes left)
Out of range
NOTE
The handset has two LEDs:
•
•
The handset is blinking, when the LED is on and off for an equal amount of time. The handset is
winking, when the LED is on for a short period of time and off for a longer period of time.
Mitel
®
5320/5330/5340 IP Phone User Guide – Release 5.0, April 2013
Do one of the following:
•
Lift the cordless handset.
•
If the handset is already out of the cradle, press the hookswitch button on the
handset.
Do one of the following:
•
Replace the cordless handset in the cradle.
•
Press the hookswitch button on the handset.
Feature
Audio indications are heard in the handset only when it is in use and may interrupt
voice transmission.
Blue – indicates the operational status of the handset.
Green – indicates the status of the electrical charge of the battery.
Function
2-pitch tone occurs immediately. Reminder tone occurs
30 seconds after activation and then regularly until
deactivated
Immediate tone with Bluetooth; no immediate tone with
DECT. Reminder tone occurs 30 seconds after activation
and then regularly until deactivated.
3 beeps and 20 second pause repeated 3 times.
3 rapid beeps and 1.5 second pause repeated 3 times.
DECT: Repetitive 3-pitch tone until you are back in range.
Note: If you are out of range for more than 10 seconds,
any call that is in progress is dropped and not recovered.
Bluetooth: Single 3-pitch tone to indicate that you are
out of range.
Note: All Bluetooth devices will drop any call in progress
if the maximum range is exceeded.
Cordless Devices
Page 87