Cordless Module Led Indicators - Mitel 5320 User Manual

4.
5.
6.
7.
8.
To unpair a cordless device:
1.
2.
3.
4.

Cordless Module LED Indicators

The cordless module has a blue LED that indicates the current status of the module. The
handset is blinking, when the LED is on and off for an equal amount of time.
Solid
Blinking
Off
Solid for two seconds
Mitel ® 5320/5330/5340 IP Phone User Guide – Release 5.0, April 2013
LED on the handset blinks. The pairing confirmation window on the IP Phone appears,
displaying the product name for the device to be paired.
If the LED on the handset does not start to blink after 10 seconds, the
handset requires charging or is still in factory battery saving mode. Place
NOTE the handset on the charger. The green LED starts to flash indicating that
the handset is charging. It could take up to 60 minutes for the green LED
to start flashing. Allow the handset to fully charge, approximately 3 hours.
For third-party Bluetooth headsets: Follow the manufacturer's instructions to place the
Bluetooth headset in pairing mode. The pairing confirmation window on the IP Phone
appears, displaying the product name for the device to be paired.
Press Yes to confirm the pairing. The Cordless Devices application prompts you to enter
a passcode.
Enter a valid passcode for the Bluetooth device (default is 0000) using the keyboard on
the display, and press OK.
For third-party Bluetooth headsets: An "Auto Connect" window displays. Press Yes if
the phone will not be shared with other users; press No if the phone will be shared with
other users and multiple headsets.
The LED on the Bluetooth Module lights and remains lit for a few seconds and then
resumes normal behavior. The Bluetooth device is paired to the Bluetooth Module.
Press OK to return to the Cordless Devices application.
Press Close to exit the application.
Press (Applications), and then press Cordless Devices.
Press the device name you want to unpair. The information screen for the selected
device appears.
Press Unpair this Device. If the device is in use, an error message appears. Otherwise,
the device is unpaired, removed from the display, and can no longer be used to interact
with the IP phone.
Press Close.
Blue LED Function
Audio is active between the module and either the
handset or headset.
Pairing mode is active or a firmware upgrade is in
progress.
No audio is active.
Pairing is successful.
Cordless Devices
Page 83