Mitel 5320 Manual

MiVOICE BUSINESS MITEL 5320 IP SET
ABOUT YOUR SET
1 - Display
2 - Ring Message Indicator
3 - Volume, Speaker, Mute controls
4 - Fixed Function Keys
5 -Dialpad
6 - Navigation Page Keys
7 - Programmable Feature and Softkeys
8 - Speaker
9 - Handset
FIXED KEYS
()()Miter
• • (Up) and (Down): provide volume control for ringer, handset and speaker.
cq»)
Speaker: Activates Handsfree Mode (speakerphone)
K
Mute: Turns microphone on/off
Ib
Menu: Provides access to menus for your phones applications and settings
®
Cancel: Ends a call and when programming the phone eliminates any input and returns to
the previous menu level
123"-~
....... Redial: Calls the last external number dialed
OCR!
Hold: Places the current call on hold. Also use as backspace when entering dialpad
characters
'" I
m:>-
Transfer/Conference: Initiates a call transfer or establishes a three party
conference call
"'~ Message: Connects to your voice mailbox and flashes to notify you of new messages
ADJUST THE VIEWING ANGLE
1.
Tum the phone so that the front faces away from you.
2. Hold the base unit firmly and press the release tabs on the sides of the stand to
detach the base unit.
3. Hinge the hooks of the base unit into the notches on the back of the phone and snap
into place as follows:
a. For a high-angle mount, hinge the two lower hooks into the
bottom set of notches and snap the two upper hooks into the
middle set of notches.
b. For a low-angle mount, hinge the two lower hooks into the middle set of
notches and snap the two upper hooks into the top set of notches.