Using The Cordless Devices Application; Low Battery Level; Viewing Cordless Module Information - Mitel MiVoice 5360 User Manual

Using the Cordless Devices Application

The Cordless Devices Application provides access to module information and pairing for
handsets or headsets.
To access the Cordless Devices Application, do one of the following:

Press the blue Menu key

Press a feature key you have programmed as the Cordless Devices Application key.
Note: When the pairing button on the Cordless Module is pressed, or when the battery level of
a Mitel-branded cordless accessory is critically low, the phone will automatically open the
Cordless Devices Application.

Low Battery Level

When the battery of a Mitel cordless device reaches a near-critical level, the phone displays a
warning. Until the battery is recharged (or until it becomes fully discharged), the warning is
repeated at each new call made using the Prime Line. To continue with a call while charging the
cordless accessory, switch to speakerphone and then cradle the cordless accessory.

Viewing Cordless Module Information

You can use the Cordless Devices Application to view protocol, firmware, and hardware
information about the Cordless Module attached to your phone.
To view Cordless Module information:
1. Access the Cordless Devices Application.
2. Press Cordless Module Info or Bluetooth Module Info. Device information appears on the
screen.
3. Press Close to exit.
, and then press Cordless Devices.
MiVoice 5360 IP Phone User Guide
91