Selecting Your Scanner (Non-Network Edition Clients) - Kodak 8383697 - Capture Pro Software User Manual

Selecting your
scanner (non-
Network Edition
clients)
2-4
The first time you start Capture Pro Software the message, Your scanner has
not been selected. Do you want to set it up now? is displayed. Click Yes to
display the Workstation Setup screen. From this screen you can select the
scanner you will be using from the list of available scanners. Subsequent
launches of the software will bypass these steps.
1. Click Select. The Select Scanner screen will be displayed.
2. Select the scanner you have installed on your PC and click OK.
3. Click OK on the Workstation Setup screen.
4. After selecting your scanner, the registration screens will be displayed.
Register your copy of Kodak Capture Pro Software to continue using the
software after the initial 14-day period.
NOTE: An Internet connection is required to complete the registration
process. Follow the on-screen prompts and enter the required
information. After submitting the registration, you have 14 days to
use the software before you need to enter the code that will be sent
to your registered e-mail address to fully unlock the software.
A-61635 December 2010