Patch Setup - Kodak 8383697 - Capture Pro Software User Manual

5 Patch Setup

Contents
About patch codes
A-61635 December 2010
About Patch Codes .................................................................................... 5-1
Setting up patch codes............................................................................... 5-2
Patch 2, 3 or T code separation............................................................. 5-2
Creating an attachment with a patch code............................................. 5-3
Separating batches or documents with patch codes ............................. 5-4
Kodak Capture Pro Software allows you to separate pages and documents on
your scanner with pages containing patch codes. It also allows you to create
attachments to your documents. Before you can use patch code separators,
you must set your job setup to recognize patch codes.
Capture Pro Software supports three types of patch codes:
Patch Type
Patch 2 Separates pages into documents
Patch 3 Separates documents into batches
Patch T Separates pages into documents
(programmable)
Separates documents into batches
Creates an attachment
You can define the separation method for each patch code. This is useful for
existing jobs where Patch 2 codes were used as document separator pages
instead of Patch T codes. You can also define a patch code to create an
attachment. For new jobs and for compatibility reasons, it is recommended
that you use patch codes the way they were designed to be used.
• For information on patch code reading when color or grayscale scanning,
see the section entitled, "Using separators when color scanning" in Chapter
6.
• For information on using patch codes on Kodak i800 and i1800 Series
Scanners, see the section entitled, "Job Setup: Scanner-specific settings" in
Chapter 4. When patch code reading is enabled on a Kodak i800/i1800
Series Scanner, patch code reading with Kodak Capture Pro Software is
not allowed. Conversely, when patch code reading is enabled with Kodak
Capture Pro Software, patch code reading on Kodak i800/i1800 Series
Scanners is not allowed.
Function Patch kept?
yes
no
no
5-1