Testing Your Settings - Kodak 8383697 - Capture Pro Software User Manual

Testing your settings

A-61635 December 2010
• Image content (%) is Above — this option is similar to the Image size
(byte) Above option except that you enter a percentage value that Capture
Pro Software will consider the image to have too much content. Any image
more than this will be deleted
• Image content (%) is Below — this option is similar to the Image size
(byte) Below option except that you enter a percentage value that Capture
Pro Software will consider the image to be blank or too little content. Any
image that is less than this value will be considered blank and will be
deleted. Use this setting when there are blank pages.
NOTE: When selecting the Image size (byte) option, other factors such as
resolution, compression, etc., will impact the image size.
The Image content (%) option only looks at the percentage of
information on the image and therefore, is a more consistent and
dependable option to use when images may vary in size, resolution,
compression, etc.
Never — click Never, if you do not want the software to delete any images
automatically.
Apply deletion to both images of a side — deletes both the black and white
and color/grayscale images.
Test — displays the Test Image dialog box, which allows you scan a sample
image and test your settings.
OK — saves your settings and closes the dialog box.
Cancel — closes the dialog box. Your entries are not saved.
Apply — accepts the changes made in the dialog box.
The Test Image dialog box allows you to test your images to determine
whether or not they meet your deletion settings. It is highly recommended that
you test your settings to be sure that the images you want to be deleted are
deleted and that you keep the images you want to keep.
1. Click Test on the Auto Delete tab to display the Test Image dialog box.
2. Place some documents in the scanner that are representative of the
documents you want to test for auto deletion.
.
7-5