Using A Job; The User Interface - Kodak 8383697 - Capture Pro Software User Manual

Using a job

A-61635 December 2010
This section provides the basic steps for creating a new batch, scanning your
documents and outputting a batch. Detailed information regarding indexing,
setting up OCR zones, patch reading, selecting different output sources, etc.
can be found in other chapters of this User's Guide.
NOTE: There are several ways to complete an action when using Kodak
Capture Pro Software. For example, if you want to open a batch, you
can select Batch>Open from the menu bar, you can click the Open
Batch toolbar button or you can press the F3 shortcut key. For the
purpose of this manual, all actions are described by using the menu
bar. For a complete list of menus, toolbar buttons and function keys
see Chapter 3, The User Interface.
1. If you have not already started Capture Pro Software, do so now. The
Batch Manager dialog box will be displayed.
2. Click New. The New Batch screen will be displayed.
3. Select the desired job setup from the Job name drop-down box. The Batch
name and Starting document ID are automatically filled in. You may
change these if desired.
2-9