Table of Contents
Advertisement
Scanner-specific
page properties
Additional page
properties for the
Scanner 1500 and
Scanner 2500
9A-6
For the Scanner 1500, Scanner 2500, and all of the mid-volume scanners
(Series 3000/4000 Scanners) except for the Scanner 3500, additional page
properties can be selected in the Page Setup dialog box.
Multi-feed thickness detection—select either None or Warn from the drop-
down list. When enabled, the scanner warns you with an audible alarm
whenever a scanned sheet of paper is detected to be thicker (commonly
caused by a multi-feed) than a single sheet.
Paper thickness—when Multi-feed thickness detection is enabled, the
sensitivity of the multi-feed detection is based upon the paper thickness
setting. Select Thin, Normal, or Thick from the drop-down list. Select Thin for
high sensitivity and more frequent occurrences of multi-feeds. Select Thick for
low sensitivity and less frequent occurrences of multi-feeds.
Lamp—select either Normal or Red Drop Out from the drop-down list. The
Scanner 2500 has a built-in red drop-out lamp that can be selected to remove
all red text and shaded areas from scanned images, leaving just the pertinent
information. This reduces image content and file size.
NOTE: The Lamp option is not available for the Scanner 1500.
Fast Feeder Speed—for normal documents, select the fast feeder
speed (rabbit icon). This is the default.
Slow Feeder Speed—select the slow feeder speed (turtle icon) for
delicate documents that may jam at a faster feeder speed.
A-63054 February 2004
Advertisement
Table of Contents
