Editing Options; Rotating Images; Page Setup - Kodak 8383697 - Capture Pro Software User Manual

Editing options

Rotating images

A-61635 December 2010
Before outputting your batch, review your images to be sure they are as you
want them. If you need to make some adjustments, tools are available for your
use. This section provides procedures for some of the more commonly used
editing functions (i.e., rotating images, deleting images, cropping images, etc.).
Procedures for splitting and merging images can be found in Chapter 7, Page
Setup.
All menu options and toolbar options are described in Chapter 3, The User
Interface.
Kodak Capture Pro Software allows you to automatically rotate your images as
they are being scanned (this is setup using Page Setup before scanning) or
manually rotate them after they are scanned. Images are rotated 90, 180 or
270° clockwise.
To manually rotate images in an existing batch:
1. Click on individual (or groups of) images, pages, or documents from the
Batch Explorer list or in the Image Viewer.
2. Select Tools>Rotate> 90, 180, or 270. The rotated images will be
displayed in the Image Viewer.
2-11