U.S.A. and other countries. FCC Compliance Any Kodak equipment referred to in this document complies with the requirements in part 15 of the FCC Rules for a Class A digital device. Operation of the Kodak equipment in a residential area may cause unacceptable interference to radio and TV reception, requiring the operator to take whatever steps are necessary to correct the interference.
Leaf Capture version 11.1.1 Release Notes Introduction ® Leaf Capture is an image capture and processing workflow software that has been designed for you to make the most of the images you take with your Leaf products, and to improve your productivity. The intuitive Leaf Capture user interface guides you through the image capture workflow.
• Leaf AFi 7 • Leaf AFi 6 • Leaf AFi 5 Note: Leaf Valeo 6 digital camera backs have not been tested with this version of Leaf Capture software. Intel-based Macintosh ® ® 970) Intel Core™ Duo or Xeon 1.83 GHz...
Leaf Capture version 11.1.1 Release Notes Leaf WiView Leaf WiView provides Bluetooth ® ® an HP iPAQ Pocket PC. Using the wireless Leaf WiView application, you or your assistant can view and work with images on an iPAQ Pocket PC as you shoot.
Leaf Capture version 11.1.1 Release Notes New Features Improved Image Quality This version of Leaf Capture provides improved image quality for images you take with your Leaf AFi 7, AFi 6, Aptus 75S, and Aptus 65S imaging modules. Sharpening artifacts are reduced, giving a pleasing Leaf look. A new sharpness preset called "Native"...
Page 8
Leaf Capture version 11.1.1 Release Notes • When turning on the camera system, the imaging module turns on as expected. • The AF assist light on an attached SCA flash no longer turns on when the light level drops. • The camera AF assist light only turns on when the light level is low.
Leaf Capture version 11.1.1 Release Notes Leaf Capture Installation Tips Updating the Imaging Module Firmware When you connect your imaging module to the Leaf Capture software, the following message appears: Click OK. The imaging module firmware is updated. This process takes approximately 10 minutes. Changing Your Mac Operating System If you change your Mac for example, if you upgrade from Mac OS 10.4.x (Tiger) to 10.5.x (Leopard), you...
Leaf Capture version 11.1.1 Release Notes General Leaf Tips Mac OS X Leopard This version of Leaf Capture supports Mac OS X Leopard. Using a Second Battery With Your Leaf AFi Imaging Module If you are using a second battery on the Leaf AFi imaging module, you must manually switch off the imaging module in the following circumstances: •...
Leaf Capture version 11.1.1 Release Notes Removing a CompactFlash Card From a Leaf Imaging Module In Tethered Mode, Connected to a Macintosh Computer To remove the CF card from the Leaf imaging module, click Disconnect the Leaf Capture software, and eject the CF card via the Apple desktop.
Leaf Capture version 11.1.1 Release Notes Known Issues This section lists known problems in the Leaf Capture software and imaging module. They may be outstanding issues from a previous release, or new problems. When a problem listed here is resolved, the solution is described in the Fixed Issues section of the release notes for the next version of the Leaf Capture software.
Page 13
Leaf Capture version 11.1.1 Release Notes Opening Mos Files in Photoshop ® Adobe Photoshop PowerPC-based Mac and then moved to and flagged on an Intel-based Mac. Workaround: Resave the file on your Intel-based Mac, and then open in Photoshop. Dragging and Dropping after Processing You cannot drag and drop files to a different partition after processing.
Leaf Capture version 11.1.1 Release Notes Leaf Capture Version 11 History The following new features were released in previous versions of Leaf Capture: Leaf Capture 11.1 • New compare view • New create custom lens calibration files wizard • Apply lens calibration to your images •...
Need help?
Do you have a question about the Leaf Aptus 54S and is the answer not in the manual?
Questions and answers