Image Stamping - Kodak 8383697 - Capture Pro Software User Manual

Image Stamping

A-61635 December 2010
Image stamping will insert information such as time, date, various sequence
numbers and job or batch name into the scanned image. The Image Stamping
dialog box allows you to place this information at various locations on the front
and/or back of the page. The front and back of a page can be configured
separately.
Front/Back: Stamp string — click Setup to display the Stamp String Setup
dialog box. You can combine one or more items from the list to build a stamp
string formula. For more information, see "Building location and filename
formulas using the Location Setup dialog box" in the "Setup option for File (1)
and File (2)" section earlier in this chapter.
Location: Top or Bottom — places the stamp on the top or bottom of the
image as selected.
Location: Left, Middle or Right — places the stamp on the left, middle or right
of the image as selected.
Margin — select a margin size in 1/100ths of an inch to indicate how far from
the Top, Bottom, Left or Right margin you want the stamp to be stamped.
Font size — select the font size of the stamp to be stamped; 16 or 18 point.
Bold — enable this checkbox for bold print.
Copy front to back — if you want same setup values on the back as the
values setup on the front, enable this checkbox.
4-77