Troubleshooting; Outputting (Processing) Your Batch - Kodak 8383697 - Capture Pro Software User Manual

Outputting (processing)
your batch
2-16
When all of your editing changes are complete, you are ready to output your
batch.
Kodak Capture Pro Software allows you to output (or process) one batch at a
time or output all available batches at once.
To output the current batch in a job setup:
1. Select Batch>Output.
When your batch is queued for output, the New Batch dialog box will be
displayed allowing you to scan another batch of documents.
2. Click OK to continue scanning images into the new batch. When you
output a batch, it is processed according to the System Output Destination
selected in the Output tab of the Job Setup dialog box. This typically results
in the batch being copied to an output subdirectory path.
To output all available batches in a current job setup:
• Select Batch>Output All. The Batch Manager dialog box will be displayed
where you can select one or more batches to be outputted.
To view the output progress:
• Select Batch>View Batch Output Status. The Kodak Capture Pro Batch
Process Status window will be displayed.
This window will update you on the progress of your batches as they are
outputted. When outputting in the background, scanning takes higher
priority. Output will be slowed until scanning is finished.
NOTE: If you experience issues when outputting your job, see Chapter 11,
Troubleshooting for problem resolution.
A-61635 December 2010