Job Setup: Scanner-Specific Setting; Kodak I1800 Series Scanners - Kodak 8383697 - Capture Pro Software User Manual

Job Setup:
Scanner-specific
settings
Kodak i1800 Series
Scanners
4-86
Not all scanners have scanner-specific settings. This section applies only to
scanners that have image addressing, batch, patch and imprinting capabilities.
If your scanner requires scanner-specific settings, a KODAK Scanner: iXXX
option will be displayed on the left side of the Output tab.
This section provides information that is specific to Kodak i1800 Series
Scanners.
The Scanner Options box allows you to access the TWAIN Datasource and
setup Message Configuration and Image Addressing options.
When you click this icon, the TWAIN Datasource will be displayed
allowing you to configure your Imprinter, Image Address, Batch and
Patch options. For information and procedures on using the TWAIN
Datasource, refer to the on-line help for the TWAIN Datasource.
New batch starts with counter equal to — enter the number you want to
start a new batch with.
A-61635 December 2010