Rotate - Kodak 8383697 - Capture Pro Software User Manual

Rotate

A-61635 December 2010
6. If a bold type is desired, click Bold.
7. Select Copy front to back if you want to duplicate the same stamp string
specified on the front page on both sides, otherwise proceed to setup the
back stamp string.
8. When finished, click OK.
NOTE: Kodak Capture Pro Software makes no attempt to fit text into the
image stamping region. If an image stamp is larger than the allocated
region, excess text will be truncated. Image stamp size is difficult to
predict and depends on the complexity of the formula, font size,
allocated margins and the string itself. It is recommended that a test
scan(s) is performed to be sure that the specified string is not too large
to fit into the stamping region.
This option allows you to select the desired rotation of 0, 90, 180 or 270
degrees. The degree of rotation applies to all images in the batch.
4-79