Deleting A Bar Code Zone; Transferring An Image To The Bar Code Window - Kodak 8383697 - Capture Pro Software User Manual

Deleting a bar code
zone
Transferring an
image to the bar code
window
A-61635 December 2010
To delete an existing bar code zone:
1. Select File>Job Setup. The Job Setup dialog box will be displayed.
2. Select a job setup from the Job Name drop-down list.
3. Open the Capture tab and select Separation>By Bar Code Zones. The
Separation by Bar Code Zone window will be displayed.
4. Click on the bar code zone that you want to delete. You can also click on
the bar code zone name in the list on the left side of the Bar Code window.
The zone is highlighted.
5. Click Delete.
6. Click OK to save your setting and close the Job Setup dialog box.
Kodak Capture Pro Software allows you to transfer an image containing bar
codes from the Image Viewer into the Bar Code window for creating bar code
zones.
To transfer a bar code image:
1. In the Main window, scan your image containing the bar code.
2. Locate and right-click on the image you want to transfer in the Image
Viewer.
3. Select Copy Image to Job Setup. The Copy Image to Job Setup dialog
box will be displayed.
4. Enter the new image name in the Save image as dialog box.
5. Click OK. You can now view the image in the Bar Code window and use it
to create a bar code zone.
You can also directly scan bar code images into the Bar Code window. See the
section entitled, "Scanning an image for bar code setup" earlier in this chapter.
6-19