Intelligent Qc - Kodak 8383697 - Capture Pro Software User Manual

Intelligent QC tab
Auto -Orientation
Binarize
A-61635 December 2010
The Intelligent QC tab of the Page Setup dialog box allows you to set up these
image processing functions during image capture:
• Auto-orientation
• Binarize
• Hole fill
Auto-orientation analyzes the content of your documents and orients each
document so it is right-reading. You can select Orient Front, which orients the
front side of a page or Orient Back, which orients the back side of a page.
Binarize converts color or grayscale images to black and white. Your scanner
must be setup to scan color or grayscale. While scanning, the image will be
converted to black and white and checked for noise. If excessive noise is
detected the image will be flagged and you will have an opportunity post-scan
to adjust the image to enhance the desired content.
Image Adjustments
• Enable Binarize — check this option to adjust the Contrast.
- Contrast: sets the contrast for each image. If your document set contains
images with faint text or colored / dark backgrounds then you may wish to
increase the contrast.
If your documents are light weight paper and content on the back side is
visible on the front then decreasing the contrast may produce better
results. In many cases a contrast of 0 will produce the best result.
7-9