Deleting A Range Of Documents; Removing Blank Images From A Batch - Kodak 8383697 - Capture Pro Software User Manual

Deleting a range of
documents
Removing blank images
from a batch
2-14
You can delete a range of documents in an existing batch.
1. Select Document>Delete Range. The Delete Documents in Range dialog
box will be displayed.
2. Enter the beginning number of the document group you want to delete in
the From Document Number field.
3. Enter the ending number of the document group in the To Document
Number field.
4. Click OK.
This option allows you to remove the blank back or front images produced by
the scanner.
1. Select Batch>Remove Blank Images. The Remove Blank Images Setup
dialog box will be displayed.
2. Enter the beginning document number in the batch where you want to
search for blank images in the Start at document field. The default is the
currently active document.
3. Define the byte-size threshold of the images to be verified in the Show
Black and White images below and Show Color/Grayscale images fields. A
good setting for typical business documents is 3000 bytes in 200 dpi black
and white.
4. Click Check only back sides to remove only the blank back sides of the
images in a batch.
5. Click Pre-select all if all images are candidates for deletion.
A-61635 December 2010