Separating Batches With Bar Code Zones; Editing A Bar Code Zone - Kodak 8383697 - Capture Pro Software User Manual

Separating batches with
bar code zones
Editing a bar code
zone
6-18
To separate batches with bar code zones:
1. Select File>Job Setup. The Job Setup dialog box will be displayed.
2. Select a job setup from the Job Name drop-down list and open the Capture
tab.
3. Select Separation>By Bar Code Zone. The Separation by Bar Code
Zone window will be displayed.
4. Select an existing bar code zone or define a new bar code zone.
5. Right-click the mouse button to display the context-sensitive menu and
click Zone Properties. The Bar Code Zone Setup dialog box will be
displayed.
6. Under Separation, select Create a new batch.
7. Click OK to exit the dialog box and return to the Separation by Bar Code
window.
8. Click OK to save your settings and exit the Job Setup dialog box.
NOTES:
• Bar code zones to be used for batch level indexing are only read when they
are present on a Batch Header page.
• A Batch Header page exists whenever batch separation is defined using
patch codes, bar codes, or OCR zones (at least one zone in the job is
configured for Batch separation).
To edit an existing bar code zone:
1. Select File>Job Setup. The Job Setup dialog box will be displayed.
2. Select a job setup from the Job Name drop-down list.
3. Open the Capture tab and select Separation>By Bar Code Zones. The
Separation by Bar Code Zone window will be displayed.
4. Click on the bar code zone that you want to change, or click on the bar
code zone name in the list on the right side of the Separation by Bar Code
Zone window.
5. Right-click the mouse button to display the context-sensitive menu and
click Zone Properties. The Bar Code Zone Setup dialog box will be
displayed.
6. After you change your settings, click OK to close the dialog box.
7. Click OK to save your settings and close the Job Setup dialog box.
8. After editing a bar code zone, test the bar code to verify that it is still
readable.
A-61635 December 2010