Overview; Supporting Documentation; Kodak Capture Pro Software Demo Version - Kodak 8383697 - Capture Pro Software User Manual

Supporting
documentation
Kodak Capture Pro
Software Demo
Version
1-2
In addition to this User's Guide, the following documentation is also available:
• On-line Help — provides product information including detailed product
setup, details about the user interface and many advanced features. To
locate information in the Help file you can use the table of contents, the
index, or the search feature.
To access Help, press F1, select the Help button on a dialog box or click the
? icon in the top right-hand corner of any window.
• On-line Tutorial — the Kodak Capture Pro Software Tutorial provides a
product overview followed by detailed product setup examples designed to
familiarize you with key Capture Pro Software features. The tutorial walks
you through the basic steps for performing tasks such as job setup,
scanning, indexing and outputting your scanned images.
The tutorial is an optional item within the Capture Pro Software installer. If it
was installed, you can run it by selecting Help>Tutorial. If it was not
installed, reinsert your Capture Pro Software installation DVD and install it or
run it from the DVD.
The tutorial for each supported language is also available for download for
the Capture Pro Software website at www.Kodak.com/go/kcsdownloads.
• Reference Guide — provides simple procedures for getting started quickly
including installing and launching Kodak Capture Pro Software. Procedures
are also provided for scanning using the default pre-defined job setups. A
PDF for this guide can be found on the Kodak Capture Pro Software DVD.
• Release Notes — contain information that may not have been available in
other supporting documentation. To view the Release Notes, go to
www.kodak.com/go/kcsdownloads
Upgrade for Version X.X link. The download page contains a link to the
latest Release Notes.
Kodak Capture Pro Software provides a demo version to demonstrate the
unique features of the software. This demo version provides many of the same
features as Kodak Capture Pro Software with the following exceptions:
• No hardware key (USB dongle) is required to run the Demo version.
• 25% of the images are stamped with the word 'Demo' (added as a bitmap to
your images).
• 100% of all images will be stamped with a "DEMO" bitmap when batches
are output.
• Changes to index data fields are only saved for the first 10 documents of
each batch. After the 10th document, any changes to the index field values
will not be saved.
and select the Capture Pro Software
A-61635 December 2010