Changing The Batch Naming Settings; Bar Code & Ocr Settings - Capture Tab; Bar Code And Ocr Setup - Kodak 8383697 - Capture Pro Software User Manual

Changing the Batch naming
settings
Bar Code & OCR settings
— Capture tab
A-61635 December 2010
When you select Setup from the Batch naming box, the Standard Setup dialog
box will be displayed where you can add or delete values to the batch name.
The Predefined values list provides values that you can select to add to the
text formula currently in use. You can add any number of items to the batch
name by selecting the item you want from the Predefined values list.
For example, if you want your batch to be labeled with the User name, date
and time you would enter the following:
User name, Date (dd), Date (yy), Time24 (HHmmss)
The result would be: John Smith0409115503.
To add a value:
1. Select the value you want to add from the Predefined values list.
2. Click Add Item. The item will be added to the formula.
NOTE: When specifying a path name, the limit is 248 characters in length.
3. If you want to add more values, repeat Steps 1 and 2.
NOTE: The Add leading zeros and Number length fields become available
when you select the Batch counter value.
4. If applicable, click Add leading zeros to add zeroes the left side of your
sequence number.
5. If applicable, enter a value in the Number length field to limit the number of
Predefined values allowed in the text formula.
6. Click OK when finished.
NOTES:
• Clicking Delete Item will remove the last predefined value from the text
formula.
• Clicking Delete Formula will remove the text formula.
See Chapter 6, Bar Code and OCR Setup for information on configuring your
bar code and OCR settings.
4-9