View Toolbar; Navigation Toolbar - Kodak 8383697 - Capture Pro Software User Manual

View toolbar

Navigation toolbar

3-16
The View toolbar contains the following commands:
Selector — displays the pointer tool, allowing you to select
images.
Selection mode — select Image, Page or Page Side.
• If you select Image, you can click on an image in the Image
Viewer and just the image will be selected.
• If you select Page, you can click on the image and the entire
page, front and back, black and white and color/grayscale, will
be selected.
• If you are scanning multiple images for a side (dual-stream
scanning), when you select Page Side, and click on a front
image, all front images will be selected. If you click on a back
image, all back images will be selected.
Magnify — allows you to enlarge a portion of an image. When
you select Magnify, the Magnify tool will be displayed. You can
enlarge any area where you place the tool. (You must click and
hold on the image.)
Pan — allows you to move the image around the window when
the image is larger than the window.
Image Viewer Display — allows you to use the down arrow to
display 1, 2, 4 or 8 images or Customize your layout. When you
select Customize, the Custom Layout Setup dialog box will be
displayed, allowing you to enter the number of rows and
columns you want to appear in the Image Viewer.
Zoom In — zooms in on all the images in the Image Viewer.
Zoom Out— zooms out on all the images in the Image Viewer.
The Navigation toolbar contains the following commands:
First Document — displays the first document of the batch in
the Image Viewer.
Last Document — displays the last document of the batch in
the Image Viewer.
Previous Document — displays the previous document of the
batch in the Image Viewer.
Next Document — displays the next document of the batch in
the Image Viewer.
A-61635 December 2010