Upgrading The Scan Station With The Embedded Application - Kodak 8383697 - Capture Pro Software User Manual

Upgrading the Scan
Station with the
embedded
application
A-61635 December 2010
1. Log into the Scan Station Pro 550 in Service mode as previously described
in "Exporting job setups". The Service Mode screen will be displayed.
NOTE: The options on the Service Mode screen may vary depending upon the
file contained on the USB drive used for configuring the Scan Station.
2. On the PC running the Kodak Scan Station Pro 550 Administration, copy
KCPEmbedded_Installer to a blank USB drive.
3. Insert the USB drive into the Scan Station 550.
4. Click Upgrade KODAK Scan Station Pro 550 from the Scan Station
Service Mode screen. The Scan Station will start the upgrade process.
5. When finished, remove the USB drive and click Reboot. The Startlist
dialog box will be displayed.
6. Select KODAK Scan Station Pro 550 and click Reboot. The Scan Station
550 will reboot in normal operation mode, i.e. ready for scanning using any
defined job setups.
F-5