Table of Contents
Advertisement
Scanner-specific
settings
DS 1500 and
DS 2500 Options
Feed modes
A-63054 February 2004
For most Kodak scanners (except the i50 Scanner, i60 Scanner, i80 Scanner,
Scanner 3500, Scanner 3510, and Color Scanner 3590C), the Application
Setup window provides a button for scanner-specific settings at the
application level. Each of these buttons is described in this section.
Click the DS 1500 or DS 2500 Options button to access the DS 1500 or
DS 2500 Setup dialog box which allows you to define scanner-specific options
for the Scanner 1500 or Scanner 2500.
The Scanner 1500 and the Scanner 2500 support four feed modes as
described in this dialog box. Only the feed mode Start Scanner from PC
for every new stack is currently available.
In this feed mode, the paper must be in the feeder before you start the scanner
from Capture Software. When the stack of paper has been scanned, or when
the feeder is empty, the scanner automatically stops. The scanner must be
restarted for every stack of paper to be scanned.
NOTE: For the Scanner 1500, which is a combination flatbed and rotary
scanner, the feed mode setting applies only to the rotary scanner.
For flatbed scanning options, refer to Chapter 9, Setting Up
Page Properties.
4-5
Advertisement
Table of Contents
